There are some common causes that make JBL speakers not give proper loudness. As many people have reported that JBL Xtreme 2 is not loud enough and and asking ‘How Can I Make My JBL Xtreme 2 Louder ?‘ . Fortunately, Audiosk have tricks you can try to make your Bluetooth speaker louder and enjoy your music.
In this article, we’ll take you on a journey to discover the techniques, tips, and tricks that will make your JBL Xtreme 2 burst with sound. To make sure your JBL Xtreme 2 sounds boom, we’ll provide you with step-by-step instructions supported by professional assistance. It’s time to turn up the volume and rock your world!
How Can I Make My JBL Xtreme 2 Louder?
Here are the steps you may take to increase the volume so that it can reach its full potential.
Pay Attention to Speaker Placement
Your JBL Xtreme 2’s sound quality is highly dependent on where you position it. Place it on a level surface, away from any walls or other objects that can dampen or hinder the sound. Another way to make the music go further and farther is to put it at your ear level.
Before you set up your JBL Xtreme 2, make sure the surface is flat and substantial, such as a table or a level outdoor location. One of the best steps is to elevate the speaker to ear level for optimal sound distribution. Inspect the area for any obstructions that can dampen the sound waves, such as furniture or walls.
Pair with Different Devices
The JBL Xtreme 2’s output loudness might be severely affected when connected to low-end devices. Considering the JBL Xtreme 2’s frequency response is incompatible with that of the budget gadget. Consequently, the loudness of the JBL Xtreme 2 was reduced.
This is not a really common situation, but it is possible for it to happen to your speaker. To fix this, just unbind it from the old device and couple it with another high-end one.
If the speaker has a low battery level, this can affect the sound quality and create problems when enjoying your music. For electronic devices, the battery is one of the most important factors that directly affects the listener’s experience.
A weak battery will not have enough power for the speaker to play music at the loudest sound level. This could then lead to problems such as why is JBL Xtreme 2 not loud.
With some modern speaker models today, the battery level will be displayed on the speaker body. When we see that the battery is 20% left, we should charge it for 2.5 hours before using it again. Regularly checks and inspects the AC adapter and charging cord very important for the speaker’s battery.
Speaker Faulty Drivers
Damaged drivers can significantly reduce the sound of the JBL Xtreme 2 and render it inoperable. These are the small speakers present inside the chassis of the JBL Xtreme 2 which produce high-frequency sounds which allow an immersive experience and loud sound.
Water damage, physical damage could occur due to the faulty power brick or voltage fluctuations. There will be a muffled and squeaky sound if the drivers of the JBL Xtreme 2 are faulty.
When purchasing, always remember to keep the warranty card and remember the date of purchase. If you encounter the above problem, you should come to receive product warranty immediately. But if the warranty has expired, then you should go to a reputable local repair shop.
Does Plugging in The JBL Xtreme 2 Increase Its Volume?
Many customers want to know how much the JBL Xtreme 2’s sound changes when they use the battery vs. when they plug it in.
Because it has a built-in power adapter and a recharging battery, the JBL Xtreme 2 can work in two different ways. When the JBL Xtreme 2 is running on battery power, it may slightly limit its output to conserve energy and prolong the battery life. Consistent and continuous power supply, which can impact the overall performance of JBL Xtreme 2.
Many people like to listen to music while they’re plugged in, but many are worried about the risks. Using the charger while the battery is charged may also shorten the battery’s life. Others are concerned that this might damage the quality of the battery. Moreover, the speaker could get too hot and become a fire hazard if you use the power source and the speaker at the same time.
JBL Xtreme 2 Low Frequency Mode
Low frequency mode makes the passive bass radiators vibrate much more and adds a low rumble quality to the playing program that travels pretty far from the speaker.
How does this feature affect the bass?
Low Frequency Mode is the feature that lowers the volume of sound to make the bass become much larger. In basic understanding, its a debug mode. It turns off your digital signal processing and equalizer etc which makes your speaker sound good and makes it sound worse. For example, normal Xtreme 2 are able to play 65 hz to 20 kHz; with this feature on, it can only play 1 hz to 20 kHz.
How to Turn Off JBL Xtreme 2 Low Frequency Mode
By default, the JBL Xtreme 2 has its low frequency mode turned ON after a reset. Due to this, you feel like your speaker’s sound is not loud. Here are our step-by-step guide to bring your speaker back to normal:
- In the first step, press and hold the power button to turn on the speaker.
- Try code combination : depressing the Volume Down (-) and Bluetooth buttons for about ten seconds
- Hold until the power and connect buttons light up white.
In contrast to low frequency mode turned off, this increases the bass output significantly while also adding some treble. This guide will make your volume increase rapidly. If the bass is crackling, distorted, or otherwise, turn it down !
You may get some useful information from Audiosk if you’re experiencing issues with the volume on your JBL Xtreme 2. The guide covers device pairing, speaker positioning, battery management, and driver difficulties. It also includes Low Frequency Mode and the pros and drawbacks of utilizing the speaker on batteries or plugged in. With our clear steps, you can fix some problems that might happen when you use the device, like a low battery or small glitches.